Tensioner set custom stainless steel 316 wired to pin + attached to pin at the other end.
This tensioner combines safety, efficiency, cleanliness and aestheticism . On the one hand, veil of shading is trapped by a PIN, on the other side the wall is also locked by a PIN and between these two points of attachments, a stainless steel cable 5mm is crimped. Even relatively strong wind, sail or wall-mounted not to dissociate not the tensioner/attached.
You can now choose a hardware to measure all stainless and adjustable length!
This Kit includes:
1 TURNBUCKLE stainless 316
1 attachment/fastening pin stainless steel 316
1 cable braided stainless steel 5mm length to define
2 crimping (performed directly at the factory) < /.li >
First each started meter stainless steel cable is of.
example: If the length you want is 256cm selected length: 300 cm.
Measures must be taken to the axis of the tensioner to the fastener axis. During the preparation of the product, the measurement is taken halfway of the tensioner, that is to say that it is unscrewed to 50% of its capacity and cdone e L1 measure 290 mm.
Ideally the defined axis/axis measure must be the exact measure of the distance sailing/fixation with a certain tension on the sail.
The exact length is to specify in the process of finalizing the order "process 3 address" in the box reserved for this purpose.
If you have any questions, don't hesitate not to contact us at the following address: firstname.lastname@example.org < /.p >